ORION 49

Ultra High Temp Lubricant
Provides extreme high temperature lubrication in excess of 700°C and heralds a new age of lubrication technology. Suited for «impossible» applications, such as oven cars, kiln cars, ovens, foundries and steel mills. Easy application, apply as normal grease. NLGI #2.

Orion 49
ORION 95+

Superior Multi-Purpose Lubricant
New technology allows use over wide temp range, -30°C to +180°C Retains the ability to stay in place even under high heat, vibration and high loads. Good water resistance and excellent ability to seal out contaminants. Excellent cohesive and high EP properties. NLGI #2 & #1.

Orion 95+ 400g
ORION 37

High Temp Chemical Resistant Grease.
Specially engineered for hostile operating environments. Excellent dielectric properties for use in electronics industries and equipment. Compatible with rubber, ideal for autoclaves, sealing o-rings, break callipers, medical equipment etc. Completely water resistance and highly chemical resistance. -20C to +220C

Orion 37 400g
ORION 47

High Temp Non Melt Lubricant
Suitable for practically every greasing operation with all types of equipment. Retains its lubricaty and continues lubricating even under high heat conditions. High water resistance. Excellent metal adhesion and water resistances. Recommended for use at temperatures up to 200°C. NLGI #2.

BL047E_Orion47
ORION 86

Enclosed Gear Grease.
Ideal for slow moving or poorly sealed gear systems. Controls wear at slow speeds. Also suited as track and roller lubricant, spreads easily and will not drip. NLGI #00.

BL086D_Orion86
ORION 87

Long-life Internal Lubricant for Chains & Cables
Effectively penetrates and lubricates the core lubricant in chains, cables and wire rope. Will not «fling off», contains ‘moly’ for extra wear resistance. Protects against saltwater corrosion, mud, water, dust and dirt. Easy to apply, even on wet surfaces, no heating required. NLGI #00. Now available in 400ml spray cans for safe and easy application.

Orion 87 400ml
ORION 92

Superior Open Gear Grease
For heavy duty service. Includes “moly” and provides super wear resistance, absorbs shock loads, protects against rust and corrosion. Easy to apply without heating; stays in place longer in hot or cold temperatures. NLGI #2.5 available in kg; NLGI #2 available in Cartridges; NLGI #1.5 available in kg, in 300mg Cartridges & in 400ml spray cans.

Orion 92 500ml
ORION 62

Super High Speed Bearing Grease.
High DN factor (1.200.000) Will not fling off. Good water resistance and excellent corrosion resistance. Can replace oil mist lubrication making a cleaner work environment. NLGI #2

BL062D_Orion62
ORION 39

Chemical Resistant Grease
Specially engineered for hostile operating environments. Non-toxic and virtually indestructible. 100% resistant to oxidative degradation and most common solvents.

Suitable even for oxygen fittings.

BL039B_Orion-39
ORION 52

Corrosion Protection Grease
Engineered to provide the highest possible lubricating and protection qualities ever, for highly corrosive saltwater and water wash environments. Specially recommended for offshore, port and ship engineering works and corrosive waste disposal environments. NLGI #2.

Orion 52 400g
ORION 63

Water Resistant EP Bearing Grease.
Forms a wear arresting film on rollers, balls and races which seal out dirt, dust, mud and water. Excellent water resistance and high heat stability making this an excellent lubricant for the steel industry. Has a minimum dropping point of 249°C. NLGI #2

BL063E_Orion63
ORION 97

Super EP Bearing and Chassis Grease
For heavy duty chassis points in both friction and anti-friction bearings. Withstands extreme shock loadings. Forms its own seal against water and outside temperatures and contaminants. Has high resistance to pounding out. Excellent cohesive and EP properties.

NLGI #2 & NLGI#00.

BL097E_Orion97
ORION 88

Ultra Low Temp Grease
Maintains outstanding physical properties and performance capabilities down to -60°C. Has excellent water resistance. Fully synthetic and is resistant to corrosion. NLGI #2.

BL088D_Orion88
ORION 72

Superior Food Machinery Grease.
For food processing and handling  equipment. General purpose grease with operating temperature range of -20°C to 130°C. Withstands mild and concentrated acidic conditions, water and detergents. NLGI #2 and NLGI#00. NSF H1 REG NR 137641

Orion 72 400g
ORION 75

Universal Food Machinery Grease
For all grease applications in food processing and handling equipment. Withstands cold temperatures, steam and extreme heat. One grease for almost all food machinery applications. Exceptional wide temperature range -50°C to 185°C Immune to mild and concentrated acidic conditions, water and detergents. NLGI #2 NSF H1 REG NR 135666 Available in Spray for safe and easy application.

BL075S_Orion-75s
ORION 100

Anti-Seize Protection Grease
Acts as a thread lubricant and sealant, guards against acid action, metal seizing and galling, galvanic action, heat and rust action. Stable from -130°C to 1090°C.

Orion 100 100g
ORION 910

New Generation Engine Oil
New-generation, synthetic, high performance engine oil engineered to surpass performance of ordinary synthetics. Better cooling and lower friction with advantage of extended drain interval for gasoline-diesel and turbo powered cars.

Available in SAE 5W40

Orion 5L blank
ORION 949

Long Life all Vehicle Motor Oil
Controls wear so effectively, it provides Ultra Long Life change intervals. Meets every vehicle engine manufacturers’ spec. Available in SAE 15W40 and 20W50.

Orion 5L blank
ORION 979

New Advanced Engine Lubricant
Engineered super tough to keep lubricating high-output, high-performance engines under the most arduous racing conditions.

SAE 5W30 5W40 10W60

Orion 5L blank
ORION 540

High Performance Air-Line Lubricant.
Designed to withstand high air pressures, dampness, oxidation and corrosive attack in air-powered tools. Flows freely even where air pressure lowers the temperature to freezing point. (SAE 10. ) ISO VG 22

Orion 5L blank
ORION 590

Food Grade Air Line Lubricant.
Makes this high quality oil suitable for use in and around food/pharmaceutical/beverage equipment. Highly stable formula provides superior lubrication in pressurized air systems. NSF H1 REG NR: 135668

Available in ISO VG 32.

BL590E_Orion-590-5L
ORION 530

Super Multi-functional Tractor Lubricant.
Suitable for practically every make and model equipment. SAE 10W30, 10W40

BL530J_Orion-530-5L
ORION 290

Weather Shield Corrosion Protection.
Physical and chemical barrier that protects against damaging corrosive outdoor conditions for up to 12 months. Provides corrosion protection for metal surfaces indefinitely during indoor storage. Brush or spray on application and easy removal. High coverage.

BL290E_ORION-290
ORION 727

Multi-purpose Maintenance Oil
For all basic maintenance requirements. Contains pure Jamaican Pimento oil making it one of the finest water-displacing agents. Also a superb rust preventative.

Now available in 400ml spray cans for safe and easy application.

Orion 727 400ml
ORION 570

Multi-Grade Hydraulic Oil
Specially designed for close tolerance hydraulic equipment. Resists viscosity loss in high heat conditions, resists «frothing» and oxidation, permitting regular cylinder action.

SAE 10W30.

BL570E_Orion-570-5L
ORION 600

Universal Machine & Hydraulic Oil
Super multi-purpose lubrication oil designed for almost all forms of machinery lubrication and equipment where EP oils are not recommended.  Available in SAE  10, 20, 30, or 40.

BL600E_Orion-600
ORION 880

Drive Chain & Hydraulic Fluid
Exceeds the latest Caterpillar TO-4 and Allison C-4 specification. For use in transmissions, hydraulics, wet brakes, power take-off’s & final drives. Unique «Balanced Fluidity» component virtually eliminates clutch/power setting adjustments for the life of your equipment.

Available in SAE 30 and 20W

BL880J_Orion-880
ORION 935

Highly Refined Two Stroke Oil
Semi synthetic formulation for moderate to high performance engines. Has excellent low ash properties preventing carbon build up.

BL935E_Orion-935-5L
ORION 450

Fully Synthetic “Food Grade” Machine and Hydraulic Oil
Orion advanced additives chemistry and synthetic base oil produce a high-performance Pharmaceutical Grade lubricant. Outlasts and outperforms any ordinary pure grade oil used in food processing, abattoirs, bottling, hospitals, canneries, bakeries and laboratories.

NSF H1 REG NR: 135670

BL450E_Orion-450-5L
ORION 460

Full Synthetic “Food Grade” Gear & Chain Lubricant
Extended service range from -30°C to 240°C. Perfect for both high heat and refrigerated applications in food processing plant.

NSF H1 REG NR: 135669

BL460C_Orion-460
ORION 620

Synthetic Air & Refrigeration Compressor Oil
Provides up to 10 times operating life of ordinary compressor oils used in rotary vane and rotary screw compressors. Suitable for use down to -54°C. Virtually eliminates oil foaming and varnish formation. NSF H1 REG NR: 135667.

Available in ISO VG 46.

Orion 5L blank
ORION 728

Clear High-Temp Chain Lubricant
100% synthetic formulation has low volatation rate for extended “wet” film lubrication. Low emission and high tackiness for «stay put» reliability. Special friction modifiers provides lubrication even should vaporization of base fluid occurs.

NSF H2 REG NR: 137791

Orion 728 400ml
ORION 740

Clear High-Temp Chain Lubricant
100% synthetic formulation has low volatation rate for extended “wet” film lubrication. Low emission and high tackiness for «stay put» reliability. Special friction modifiers provides lubrication even should vaporization of base fluid occurs.

NSF H2 REG NR: 137791

Orion 5L blank
ORION 757

Emulsifiable Machining & Cutting Fluid
An advanced bio stable emulsifiable machining and cooling fluid formulated for tough precision work. Superior performance in both hard and soft water with excellent anti-foam properties. Non corrosive and can be used on all metal types.

BL757E_Orion-757-5L
ORION 758

Straight Machining & Cutting Oil
Straight cutting and machining oil for tough work on all metal types. Uses special EP additives that will not stain yellow metals such as bronze and brass. Has low viscosity to provide higher cooling efficiency.

Orion 5L blank
ORION 610

High Performance Compressor Oil
Controls oxidation at elevated temperatures. Seals packing and pistons to prevent air leakage, stops the formation of carbon deposits and acts as a heat transfer medium. Highly Recommended for vacuum pumps.

Available in SAE 10, 20, 30 or 40.

BL610E_Orion-610-5L
ORION 625

New Generation Synthetic Compressor Fluid
Engineered with state of the art technology for tough operating conditions and extended service intervals. Withstands high temperatures with min oil loss and “stay in grade” properties for increased efficiency. Suitable for all types of compressors.

ISO VG 46

BL625E_Orion-625-5L
ORION 580

Super Chain & Slideway Lubricant
Features extra high film strength to prevent chains from scoring, cracking and breaking. Excellent for slideways, high-speed chains, conveyors and hookways.

Available in ISO VG68, 100 and 220.

Orion 5L blank
ORION 730

High Temp Chain Lubricant
Superior «ORION» additive prevents metal welding and shearing. High stability to provide lubrication for chains where other ordinary oils fling off, drip off or melt off.

Available in ISO 220.

Orion 5L blank
ORION 800

Pure Mineral Gear Lubricant
A premium oil heavily fortified against foam and oxidation permitting high heat and improved wear performance. Features extra high film strength to SAE 90 or 140.

BL800E_Orion-800-5L
ORION 820

Exceptional Quality Worm Gear Lubricant
Improves operating efficiency, sales energy, lowers operating temperatures and provides superior operating life for worm gear sets.

BL820E_Orion-820-5L
ORION 870

Water Resistant EP Gear Lubricant
Allows transmissions, differentials and gearboxes to man efficiently for long periods. High water resistance, reduces acid and frictional wear. For multi-purpose, hypoid and extreme pressure applications as well as worm gear and limited slip differential applications.

Available in SAE 75W90, 80W90, 85W140, 90, 140 and Special «Shear Stable» 75W140.

BL870Y_Orion-870-5-20L-felles
ORION 890

Superior Automatic Transmission Fluid
Provides protection from heat and oxidation – the two greatest enemies of automatic transmissions. Designed to withstand severe operating conditions. Will not damage oil seals, impervious to temperature changes.

BL890E_Orion-890-5L
ORION 760

High Efficiency Heat Transfer Oil
Engineered to the highest operating standards. Improved heat transfer properties due to exceptionally fine, low viscosity base oil.

BL760C_Orion-760
ORION 230

Hydraulic & Industrial Oil Booster
Designed specifically to improve operating efficiency and reduce maintenance requirements of all industrial equipment dependent on oil lubrication. Stabilises lubricant viscosity at all temperatures, provides improved lubricity. Typical applications include hydraulics and industrial transmissions.

BL230G_ORION-230
ORION 250

Engine & Compressor Flush
Prevents the immediate deterioration of new oil by cleaning out all the damaging components of the old oil.

BL250F_Orion-250
ORION 272

Super Motor Oil Additive.
Gives engine oil greater lubricity to provide effective lubrication from the first revolution. Improves compression, controls oil consumption and prevents excessive wear.

  • Coming soon
  • Coming soon
BL272F_ORION-272
ORION 295

Super Multifunctional Diesel Additive.
Orion 295 provides lubrication to fuel pumps and top end areas. Cleans injectors and removes damaging carbon deposits. Prevents water emulsions and gives an unsurpassed corrosion protection from the fuel storage tanks to exhaust. Boosts cetane, reduces emissions, easier starting and anti foam. Improves the fuel economy.

BL295F_ORION-295
ORION 299

Fuel Injection Cleaner and Lubricant.
Eliminates clogged fuel injectors in both petrol and diesel passenger cars and all types of heavy diesel vehicles. Cleans and lubricates injectors, provides excellent corrosion protection, prevents water emulsions (which causes vapour lock) and ensures rapid, «as new» driveability and economy.

Orion Logo
ORION 202

Liquid Sealant
Designed for permanent sealing of all recirculated water cooling systems. Assists the operation by lubricating water pumps with a special anti-friction additive. Suppresses rust formation.

Orion 202 300ml
ORION 240

Cooling System Conditioner
Prevents corrosion, protects and lubricates water pumps and seals. Ensures better thermostat operation. One application protects for up to 6 months.

BL240F_ORION-240
ORION 245

Radiator Flush
Removes loose rust and dissolves oily deposits from the cooling system. Cleans cooling system restoring efficiency.

BL245F_ORION-245-SPECIAL-RADIATOR-FLUSH
ORION 288

«Seal Reconditioner».
Lubricates, protects and prolongs the life of engine and equipment seals. Prevents seal deterioration and assists in conditioning seals to prevent fluid loss. Equipment dismantling for seal replacement is forever banished with regular use.

BL288H_ORION-288
ORION 203

Tire mounting lubricant
Orion 203 is a water soluble super time saving tyre and rubber component mounting liquid. Orion 203 is formulated to simplify tyre changing, from heavy duty large construction equipment to low profile tyres. The super lubricity of Orion 203 makes fitting tyres to rim easier and faster.

Orion 203
ORION 51

Superior Concrete Cleaner
Is a highly effective yet gentle cleaner for removal of concrete and lime based residues. Contains special surfactants to assist in residue removal and inhibitors to protect against corrosion and very easy to use.

Orion 5L blank
ORION 55

Heavy Duty Degreaser
A specially developed blend of solvents and emulsifiers designed to be used for the removal of oil, grease and dirt from most forms of machinery and tools. It also can be used to clean concrete floors and other surfaces where a heavy duty cleaner is required.

Orion 5L blank
ORION 56

Powerful Degreaser Cleaner
Formulated to handle tough degreasing work yet at the same time be mild enough to use on car body paintwork. The Product uses biodegradable ingredients so is safe to flush down drains for sewage treatment. Ideal for tough degreasing of engine blocks and parts, floors, insect removal, industrial machinery.

Orion 5L blank
ORION 999

Superior Degreaser
A powerful highly effective solvent cleaner for all oil and grease removal. Removes grease, dust, oil and brake fluids. Will not corrode metal components, safe with most rubber and plastic parts. Quick drying and residue free. For use on brakes, discs, cables, rotors, electrical motors, switches and clutch mechanisms.

BL999S_Orion-999
ORION 37

High Temp Chemical Resistant Grease.
Specially engineered for hostile operating environments. Excellent dielectric properties for use in electronics industries and equipment. Compatible with rubber, ideal for autoclaves, sealing o-rings, break callipers, medical equipment etc. Completely water resistance and highly chemical resistance. -20C to +220C

Orion 37 400g
ORION 72

Superior Food Machinery Grease.
For food processing and handling  equipment. General purpose grease with operating temperature range of -20°C to 130°C. Withstands mild and concentrated acidic conditions, water and detergents. NLGI #2 and NLGI#00. NSF H1 REG NR 137641

Orion 72 400g
ORION 75

Universal Food Machinery Grease
For all grease applications in food processing and handling equipment. Withstands cold temperatures, steam and extreme heat. One grease for almost all food machinery applications. Exceptional wide temperature range -50°C to 185°C Immune to mild and concentrated acidic conditions, water and detergents. NLGI #2 NSF H1 REG NR 135666 Available in Spray for safe and easy application.

BL075S_Orion-75s
ORION 450

Fully Synthetic “Food Grade” Machine and Hydraulic Oil
Orion advanced additives chemistry and synthetic base oil produce a high-performance Pharmaceutical Grade lubricant. Outlasts and outperforms any ordinary pure grade oil used in food processing, abattoirs, bottling, hospitals, canneries, bakeries and laboratories.

NSF H1 REG NR: 135670

Orion 5L blank
ORION 460

Full Synthetic “Food Grade” Gear & Chain Lubricant
Extended service range from -30°C to 240°C. Perfect for both high heat and refrigerated applications in food processing plant.

NSF H1 REG NR: 135669

BL460C_Orion-460
ORION 590

Food Grade Air Line Lubricant.
Makes this high quality oil suitable for use in and around food/pharmaceutical/beverage equipment. Highly stable formula provides superior lubrication in pressurized air systems. NSF H1 REG NR: 135668

Available in ISO VG 32.

Orion 5L blank
ORION 620

Synthetic Air & Refrigeration Compressor Oil
Provides up to 10 times operating life of ordinary compressor oils used in rotary vane and rotary screw compressors. Suitable for use down to -54°C. Virtually eliminates oil foaming and varnish formation. NSF H1 REG NR: 135667.

Available in ISO VG 46.

Orion 5L blank
ORION 728

Clear High-Temp Chain Lubricant
100% synthetic formulation has low volatation rate for extended “wet” film lubrication. Low emission and high tackiness for «stay put» reliability. Special friction modifiers provides lubrication even should vaporization of base fluid occurs.

NSF H2 REG NR: 137791

Orion 728 400ml
ORION 740

Clear High-Temp Chain Lubricant
100% synthetic formulation has low volatation rate for extended “wet” film lubrication. Low emission and high tackiness for «stay put» reliability. Special friction modifiers provides lubrication even should vaporization of base fluid occurs.

NSF H2 REG NR: 137791

BL740C_Orion-740